白朗寧M2

Using a round originally designed by Winchester, the .50 BMG round was designed as a response to the German 13mm anti-tank rifle of World War I and employed in a redesigned and scaled-up M1917 Browning .30 cal. machine gun. It was quickly adapted to the anti-aircraft role. It was also selected for the ground role and adopted by the U.S. as the Model 1921. The latter served during the 1920s as an anti-aircraft and anti-armor gun. In 1932, the design was updated and adopted as the M2, though fulfilling the same role. As with the M1921, the original infantry variant of the M2 was equipped with a water jacket for cooling [1]. A variant without a water jacket, but with a thicker-walled, air-cooled barrel superseded it (air-cooled barrels had already been used on variants for use on aircraft, but these quickly overheated in ground use). The added mass and surface area of the new barrel compensated, somewhat, for the loss of water-cooling, while reducing bulk and weight (the M2 weighed 121 lbs, with water, whereas the M2 HB weighs 84 lbs). This new variant was the designated the M2 HB (HB for Heavy Barrel). Due to the long procedure for changing the barrel, an improved system was developed called QCB (quick change barrel). A lightweight version, weighing 24 lb (11 kg) less—a mere 60 lb (27 kg)—was also developed.

The M2 is a scaled-up version of John Browning's M1917 .30 caliber machine gun (even using the same timing gauges), and fires the .50 BMG cartridge, which today is also used in high-powered sniper rifles and long range target rifles due to its excellent long range accuracy, external ballistics performance, incredible stopping power, and lethality. The M2 is an air-cooled, belt-fed, machine gun that fires from a closed bolt, operated on the short recoil principle. In this action, the bolt and barrel are initially locked together, and recoil upon firing. After a short distance, the bolt and barrel unlock, and the bolt continues to move rearwards relative to the barrel. This action opens the bolt, and pulls the belt of ammunition through the weapon, readying it to fire again, all at a cyclic rate of 450–550 rounds per minute (600–1,200 M2/M3 in WW2 aircraft, 300 synchronized M2). This is a rate of fire not generally achieved in use, as sustained fire at that rate will "shoot out" the barrel within a few thousand rounds, necessitating replacement. The M2 machine gun's sustained rate of fire is considered to be anything less than 40 rounds per minute.

The M2 has a maximum range of 7.4 kilometers (4.55 miles) when using the M2 ball ammunition, with a maximum effective range of 1.8 kilometers (1.2 miles) when fired from the M3 tripod. In its ground-portable, crew-served role, the gun itself weighs in at a hefty 84 pounds (38 kg), and the assembled M3 tripod another 44 pounds (20 kg). In this configuration, the V-shaped "butterfly" trigger is located at the very rear of the weapon, with a "spade handle" hand-grip on either side of it and the bolt release the center. The "spade handles" are gripped and the butterfly trigger is depressed with one or both thumbs. When the bolt release is locked down by the bolt latch release lock on the buffer tube sleeve, the gun functions in fully automatic mode. Conversely, the bolt release can be unlocked into the up position resulting in single-shot firing (the gunner must press the bolt latch release to send the bolt forward). In either mode the gun is fired by pressing the butterfly triggers. Recently new rear buffer assemblies have used squeeze triggers mounted to the hand grips doing away with the butterfly triggers.

Because the M2 was intentionally designed to be fit into many configurations, it can be adapted to feed from the left or right side of the weapon by exchanging the belt-holding pawls, the belt feed pawl, the front and rear cartridge stops, and reversing the bolt switch. The conversion can be completed in under a minute with no tools.

When firing blanks, a large blank-firing adapter (BFA) must be used to keep the gas pressure high enough to allow the action to cycle. The adapter is very distinctive, attaching to the muzzle with three rods extending back to the base. The BFA can often be seen on M2s during peacetime operations.